Conference proceedings 2012 — 2021
Submitted, Accepted, Published
Total number: 116
Ceramics
[tabs][tab title=”2020″]
Marvel, C. Behler, K. Domnich, V. LaSalvia, J. Haber, R. Masashi Watanabe, M. and Harmer, M. (2020) “Recent Developments of z-factor Microanalysis and Its Application to Armor Ceramics.”
[/tab][tab title=”2017″]
Khan, A. (2017) “Boron carbide based ceramics: Problems and possible solutions.” 30-35.
[/tab][tab title=2016]
Aydelotte, B. Jannotti, P. Andrews, M. and Schuster, B. (2016) “Parametric Study of the Formation of Cone Cracks in Brittle Materials.”
[/tab][tab title=2015]
1 Aydelotte, B. and Schuster, B. (2015) “Observation and Modeling of Cone Cracks in Ceramics.”
2 Celik, A. M. Haber, R. Kuwelkar, K. and Rafaniello, B. (2015) “Preparation, Characterization and Development of TiB2 Hard Ceramic Materials.”
3 Etzold, A. Haber, R. and Rafaniello, B. (2015) “Screening Of Silicon Precursors For Incorporation Into Boron Carbide.”
4 Kuwelkar, K. Domnich, V. and Haber, R. (2015) “Assessing the Carbon Concentration in Boron Carbide: A Combined X-Ray Diffraction and Chemical Analysis.” 103-110.
5 Munhollon, T. Kuwelkar, K. and Haber, R. (2015) “Processing of Boron Rich Boron Carbide by Boron Doping.” 119-128.
[/tab][tab title=2014]
Behler, K. Hutchinson, A. and LaSalvia, J. (2014) “The Effect of SiO2 and B2O3 Additives on the Microstructure and Hardness of Hot-Pressed Boron Carbide.”
[/tab][tab title=2013]
Toksoy, F. Rafaniello, B. Haber, R. and Miller, S. (2013) “Densification of Synthesized Boron Carbide Powders using SPS.” 115-123.
[/tab][tab title=2012]
Clayton, J. Leavy, B. and Kraft, R. (2012) “Dynamic compressibility, shear strength, and fracture behavior of ceramic microstructures predicted from mesoscale models.” [/tab][/tabs]
Composites
[tabs][tab title=”2021″]
1 Chowdhury, S.C., Hemphill, M., Kubota, M., Gillespie, Jr., J.W. (2021) “EFFECTS OF STRAIN RATE, TRANSVERSE PRESSURE AND FIBER SURFACE ROUGHNESS ON TRACTION LAWS OF GLASS FIBER EPOXY INTERPHASES.”
2 Doshi, S.M., Manoharan, N., Haque, B.Z., Deitzel, J.M., Gillespie, Jr., J.W. (2021) “Investigating the Influence of Environmental Conditioning on Epoxy resins at Quasistatic and High Strain Rates for Material Operating Limit.”
3 Meyer, C.S., Haque, B.Z., O’Brien, D. J., Gillespie, Jr., J.W. (2021) “Micromechanical Finite Element Prediction of Interlaminar Traction-Separation Laws Using J-Integral Approach.”
4 Yeon, J., Chowdhury, S.C., Daksha, C., Belmonte, D., VanDuin, A., Gillespie, Jr., J.W. (2021) “Parameterization of REAXFF Potential of Mg/Al/Si/O Interaction and Investigation of Mechanical Properties for S-Glass.”
[/tab][tab title=2020]
1 Chen, B. Parambil, N. Deitzel, J. Gillespie, J. Vo, L. and Sarosi, P. (2020) “Interfacial Shear Strength (IFSS) and Absorbed Energy versus Temperature in Carbon Fiber-Thermoplastic Composites via Single Fiber Pullout Testing.”
2 Chen, B.R., Parambil, N.K., Deitzel, J.M., Gillespie, Jr., J.W., Vo, L.T., Sarosi, P. (2020) “INTERFACIAL SHEAR STRENGTH (IFSS) AND ABSORBED ENERGY VERSUS TEMPERATURE IN CARBON FIBER-THERMOPLASTIC COMPOSITES VIA SINGLE FIBER PULLOUT TESTING.”
3 Chowdhury, S. C. Prosser, R. and Gillespie, J. (2020) “Molecular Modeling of Glass-Epoxy Interphase: Influence of Chemistry and Molecular Weight of Silanes.”
4 Daksha, C. Yeon, J. Chowdhury, S. C. and Gillespie, J. (2020) “Parametrization of Reactive Potential using Genetic Algorithm and Machine Learning Techniques.”
5 Gao, J. Kedir, N. Kirk, C. Hernandez, J. Wang, J. Zhai, X. Horn, T. Kim, G. Fezzaa, K. De Carlo, F. Shevchenko, P. Tallman, T. Sterkenburg, R. and Chen, W. (2020) “In-situ observation of dynamic damage evolution inside GFRCs through high-speed X-ray PCI.”
6 Gao, J. Kedir, N. Kirk, C. Hernandez, J. Zhai, X. Wang, J. Tallman, T. Fezzaa, K. and Chen, W. (2020) “Real-time visualization of damage progression inside GFRP composites via high-speed X-ray PCI technique.”
7 Kubota, M. Chowdhury, S. C. Deitzel, J. Gillespie, J. and Palmese, G. (2020) “Tailoring the S-2 Glass/Epoxy Interface Properties through Chemical Vapor Deposition of Silane Adhesion Promotors.”
8 Kubota, M. Deitzel, J. and Gillespie, J. (2020) “Role of Surface Functionality and Polyamic Acid in Carbon Fiber/PEI Interface.”
[/tab][tab title=2019]
1 Chowdhury, S. C. Prosser, R. Sirk, T. and Gillespie, J. (2019) “Molecular Modeling of Silica-Epoxy Interphase with Monolayer Silane.”
2 Gao, J. and Palmese, G. (2019) “Deformable High-Tg Epoxy Toughened Systems via Incorporation of Partially Reacted Substructures.”
3 Gao, J. Guo, Z. Nie, Y. Hernandez, J. Lim, B. Kedir, N. Tallman, T. and Chen, W. (2019) “Transverse impact on a single layer S-Glass/SC15 epoxy composite strip.”
4 Haque, B. Z. Ali, M. O’Brien, D. and Gillespie, J. (2019) “Micromechanical Modeling of High Rate Punch Shear Behavior of Unidirectional Composites.”
5 Meyer, C. Haque, B. Z. O’Brien, D. and Gillespie, J. (2019) “Mesoscale and Continuum Models of Wave Propagation in a Woven Composite.”
6 Zhang, X. Li, Z. O’Brien, D. and Ghosh, S. (2019) “Parametrically Homogenized Continuum Damage Mechanics (PHCDM) Models for Composites from Micromechanical Analysis.” 657-665.
[/tab][tab title=2018]
1 Chowdhury, S. C. Gillespie, J. Elder, R. Sirk, T. and Hartman, D. (2018) “Molecular Modeling of Glass Fiber-Sizing Interphase.”
2 Chowdhury, S. C. Wise, E. Elder, R. Sirk, T. Hartman, D. and Gillespie, J. (2018) “Molecular Dynamics Simulations of Fiber-Sizing Interphase.”
3 Chowdhury, S.C., Wise, E., Elder, R., Sirk, T., Harman, D., Gillespie, Jr., J.W., (2018) “Molecular Dyanmic Simulations of Fiber-Sizing Interphase.”
4 Chu, J. Claus, B. Lim, B. O’Brien, D. Sun, T. Fezzaa, K. and Chen, W. (2018) “Visualization of fiber/matrix interfacial shear debonding mechanism at high rate loading.”
5 Gillespie, J. Ali, M. Yen, C. O’Brien, D. and Haque, B. Z. (2018) “Micro Punch Shear Testing of Unidirectional Composites: A New Test Method.”
6 Gillespie, J. Meyer, C. Bonyi, E. O’Brien, D. and Aslan, K. (2018) “Ballistic Impact Experiments and Quantitative Assessments of Mesoscale Damage Modes in a Single-layer Woven Composite.” 9-17.
7 Haque, B. Z. Ali, M. Ganesh, R. Tamrakar, S. Yen, C. O’Brien, D. and Gillespie, J. (2018) “Micromechanical Finite Element Modeling of Micro Punch Shear Experiments on Unidirectional Composites.”
8 Sockalingam, S. Casem, D. Weerasooriya, T. and Gillespie, J. (2018) “Tailored Glass Fiber Experimental Compression Response of Ballistic Single Fibers.” 51-55.
9 Tamrakar, S. Ganesh, R. Sockalingam, S. and Gillespie, J. (2018) “Determination of Mode II Traction Separation Law for S-2 Glass/Epoxy Interface Under Different Loading Rates Using a Microdroplet Test Method.”
10 Yeon, J. Chowdhury, S. C. Mrityunjay, D. and Gillespie, J. (2018) “Atomistic Scale Simulation for the interdiffusion of Epon 828 and Jeffamine.”
[/tab][tab title=2017]
1 Bonyi, E. Lansiquot, C. Kioko, B. Adesina, O. Aslan, K. Meyer, C. O’Brien, D. Haque, B. Z. and Gillespie, J. (2017) “Quantitate Assessment of Ballistic Damage of a Plain-weave S-2 Glass Epoxy Composite.”
2 Chowdhury, S. C. and Gillespie, J. (2017) “Modeling of Glass Fiber with Surface Cracks – A Molecular Dynamics Simulation Study.”
3 Chu, J. Claus, B. Parab, N. O’Brien, D. Fezzaa, K. Sun, T. and Chen, W. (2017) “Visualization of Fiber/Matrix Interfacial Shear Debonding Mechanism at High Rate Loading.”
4 Chu, J. Claus, B. Parab, N. O’Brien, D. Fezzaa, K. Sun, T. and Chen, W. (2017) “Visualization of fiber/matrix interfacial transverse debonding.”
5 Ganesh, R. Loesch, R. Henderson, E. and Gillespie, J. (2017) “Experimental Determination of Strength Distribution of S2-Glass Fibers Across a Wide Range of Gage Lengths.”
6 Meyer, C. Haque, B. Z. Lawrence, B. Bonyi, E. O’Brien, D. Gillespie, J. and Aslan, K. (2017) “Mesomechanical Modeling of Tensile Damage Modes in Single Layer Plain Weave S-2 Glass/SC15 Composites.”
[/tab][tab title=2016]
1 Bain, E. Knorr, D. Richardson, A. Masser, K. Yu, J. and Lenhart, J. (2016) “Failure Processes Governing High Rate Impact Resistance of Epoxy Resins Filled with Core Shell Rubber Nanoparticles.”
2 Chowdhury, S. C. Elder, R. Sirk, T. Haque, B. Z. Andzelm, J. and Gillespie, J. (2016) “Molecular Dynamics Study of the Mechanical Properties of Silica Glass Using ReaxFF.”
3 Ganesh, R. Sockalingam, S. Haque, B. Z. and Gillespie, J. (2016) “A Finite Element Study of Dynamic Stress Concentrations Due to a Single Fiber Break in a Unidirectional Composite.”
4 Long, T. Masser, K. Elder, R. Sirk, T. Hindenlang, M. Yu, J. Richardson, A. Boyd, S. Spurgeon, W. and Lenhart, J. (2016) “Ballistic Response of Polydicyclopentadiene vs. Epoxy Resins and Effects of Crosslinking.”
5 Meyer, C. Key, C. Haque, B. Z. and Gillespie, J. (2016) “Initial Experimental Validation of a Eulerian Method for Modeling Composites.” 103-110.
6 O’Neill, J. Gunnarsson, C. Moy, P. Masser, K. Lenhart, J. and Weerasooriya, T. (2016) “Fracture Response of Cross-Linked Epoxy Resins at High Loading Rate as a Function of Glass Transition Temperature.”
7 Tamrakar, S. Thostenson, E. Haque, B. Z. and Gillespie, J. (2016) “Monitoring Crack Growth Along the Interface in a Microdroplet Specimen Using Non-invasive Carbon Nanotube Sensors.” 1-1.
8 Zhang, X. Li, Z. Ghosh, S. and O’Brien, D. (2016) “Parametric Homogenization Based Continuum Damage Mechanics Model for Composites.” 384-398.
[/tab][tab title=2015]
1 Chowdhury, S. C. Elder, R. Sirk, T. Haque, B. Z. Andzelm, J. and Gillespie, J. (2015) “Effect Cross-Linker Length on Epon 828 Resin Properties using Molecular Dynamics Simulation.”
2 Chowdhury, S. C. Elder, R. Sirk, T. Haque, B. Z. Andzelm, J. and Gillespie, J. (2015) “Modeling Glass Fiber Sizing Interphase Layer using Molecular Dynamics Simulations.”
3 Haque, B. Z. and Gillespie, J. (2015) “Experiment and Analysis of Depth of Penetration Experiments on Thick-Section S-2 Glass/Sc15 Composites.”
4 Haque, B. Z. and Gillespie, J. (2015) “Progressive Composite Damage Modeling in LS-DYNA using MAT162: Part A – Properties and Parameters.”
5 Haque, B. Z. and Gillespie, J. (2015) “Progressive Composite Damage Modeling in LS-DYNA using MAT162: Part B – Model Validating Experiments.”
6 Misumi, J. Ganesh, R. Gillespie, J. and Sockalingam, S. (2015) “Evaluation of Size Effect on Epoxy Resin Tensile Properties using Micro-Scaled Specimens.”
7 O’Brien, D. Meyer, C. Getinet, N. Yu, J. Haque, B. Z. and Gillespie, J. (2015) “Ballistic Perforation Mechanics of Single Layer Plain-Weave S-2 Glass/SC15 Composites.”
8 Sharifi, M. Haque, B. Z. Gillespie, J. and Palmese, G. (2015) “Rate Dependent Mechanical Behavior of Polymer Network Isomers with Controlled Topology.”
9 Yeager, M. Ganesh, R. Yarlagadda, S. Advani, S. and Gillespie, J. (2015) “A Unit Cell Model to Predict Impact of Geometric and Processing Parameters on Energy Absorbed by Fiber Composites.”
[/tab][tab title=2014]
1 Chowdhury, S. C. Haque, B. Z. Gillespie, J. van Duin, A. and Andzelm, J. (2014) “Molecular Simulations of Silica-Water-Silane System Using Reactive Force Field Potential REAXFF.”
2 Chowdhury, S. C. Haque, B. Z. and Gillespie, J. (2014) “Study of the Interaction of Silica Glass Surface with Water and Silane Coupling Agent.”
3 Mrozek, R. Hindenlang, M. Masser, K. Yu, J. and Lenhart, J. (2014) “Rate Dependent Response of Cross-Linked Epoxy Networks.”
4 Sockalingam, S. Ganesh, R. Misumi, J. Abu-Obaid, A. and Gillespie, J. (2014) “Three Dimensional Modeling of Unidirectional Composites with Fiber Fracture: Role of Matrix Properties.”
5 Tamrakar, S. Haque, B. Z. and Gillespie, J. (2014) “High Rate Test Method for Fiber-Matrix Interface Characterization.”
6 Tamrakar, S. Sockalingam, S. Haque, B. Z. and Gillespie, J. (2014) “High Strain Rate Fiber Matrix Interface Characterization – Experimental Testing and Finite Element Analysis.”
[/tab][tab title=2013]
1 Chowdhury, S. C. Haque, B. Z. and Gillespie, J. (2013) “Molecular Simulations of Silica Surface in Presence of Water.”
2 Chowdhury, S. C. Haque, B. Z. and Gillespie, J. (2013) “Study of the Stress Wave Propagation in Carbon Nanotubes using Peridynamics Simulation.”
3 Haque, B. Z. Biswas, I. and Gillespie, J. (2013) “Modeling the Depth of Penetration of Very Thick Composites.”
4 Haque, B. Z. Stanton, R. and Gillespie, J. (2013) “Perforation Mechanics of Thin Composites.”
5 Sockalingam, S. Gillespie, J. and Keefe, M. (2013) “Detailed Modeling and Analysis of Single-Fiber Microdroplet Test using Cohesive Zone Approach.”
[/tab][tab title =2012]
1 Chowdhury, S. C. Haque, B. Z. and Gillespie, J. (2012) “Peridynamic Approximation of Graphene and Carbon Nanotube Response.”
2 Gillespie, J. Caulfield, A. Biswas, I. Tierney, J. Adkinson, R. Bogetti, T. Yiournas, A. and Wagner, J. (2012) “Modeling Multiple High-Energy Low-Velocity Impact (HE-LVI) on Thick-Section Composite Plates.”
3 Haque, B. Z. and Gillespie, J. (2012) “A New Penetration Equation Satisfying Momentum & Energy Conservation.”
4 Haque, B. Z. and Gillespie, J. (2012) “Modeling Composite Damage using MAT162 in LS-DYNA.”
5 Haque, B. Z. Chowdhury, S. C. Biswas, I. Schweiger, P. Gillespie, J. and Hartman, D. (2012) “Modeling the Low Velocity Impact Damage Behavior of S-Glass/Phenolic Composites.”
6 Tamrakar, S. Haque, B. Z. and Gillespie, J. (2012) “Modeling and Simulation of the Miniature Tensile Hopkinson Bar for Characterizing the Dynamic Properties of Fibers.”[/tab][/tabs]
Integrative
[tabs][tab title=”2015″]
Barnes, B. Spear, C. Becker, R. Knap, J. Lisal, M. and Brennan, J. (2015) “Hierarchical multiscale framework for materials modeling: Equation of state implementation and application to a Taylor anvil impact test of RDX.”[/tab][/tabs]
Metals
[tabs][tab title=”2021″]
Baweja, S, Indurkar, PP, Joshi, SP (2021) “On the Role of Crystallographic Anisotropy and Texture in Damage Tolerance of Magnesium and its Alloys.” 81-.[/tab]
[tab title=”2020″]
Indurkar, PP, Baweja, S, Perez, R, Vuppuluri, A, Joshi, SP (2020) “Mapping Anisotropy and Triaxiality Effects in Magnesium Alloys.” 321-328.[/tab]
[tab title=”2018″]
1 Ghosh, S. Bhattacharya, K. and Ortiz, M. (2018) “A Novel Coarse-Grained Formulation of Density Functional Theory for Studying Defects in Crystalline Materials.”
2 Ghosh, S. Bhattacharya, K. and Ortiz, M. (2018) “A novel Coarse-Grained Formulation of Density Functional Theory: Designing next generation magnesium alloys.”[/tab]
[tab title=”2017″]
Williams, C. Farbaniec, L. Kecskes, L. and Bradley, J. (2017) “Microstructural effects on the spall properties of ECAE and SWAP magnesium alloys: AZ31B-4E and AMX602.”[/tab]
[tab title=”2016″]
1 Casem, D. Lloyd, J. and Gazonas, G. (2016) “High-Rate Micro-Compression Using an Elastic Half-Space Loading Configuration.”
2 Grapes, M. Zhang, Y. Santala, M. Voisin, T. Campbell, G. and Weihs, T. (2016) “In Situ High-Rate Mechanical Testing in the Dynamic Transmission Electron Microscope.”
3 Meredith, C. and Lloyd, J. (2016) “Texture Evolution of a Fine-Grained Mg Alloy at Dynamic Strain Rates.”
4 Voisin, T. Grapes, M. Zhang, Y. Lorenzo, N. Ligda, J. Schuster, B. Santala, M. Li, T. Campbell, G. and Weihs, T. (2016) “DTEM In Situ Mechanical Testing: Defects Motion at High Strain Rates.”
5 Williams, C. Sano, T. Walker, T. and Kecskes, L. (2016) “Microstructural Effects on the Spall Properties of 5083 Aluminum: Equal-Channel Angular Extrusion (ECAE) Plus Cold Rolling.”[/tab]
[tab title=2015]
Casem, D. Huskins, E. Ligda, J. and Schuster, B. (2015) “A Kolsky Bar for High-Rate Micro-compression: Preliminary Results.”[/tab]
[tab title=2014]
Lloyd, J. Clayton, J. Austin, R. and McDowell, D. (2014) “Modeling single-crystal microstructure evolution due to shock loading.” 112-40.[/tab][/tabs]
Polymers
[tab][tab title=2018]
Thomas, F. Casem, D. Weerasooriya, T. Sockalingam, S. and Gillespie, J. (2018) “Influence of High Strain Rate Transverse Compression on the Tensile Strength of Polyethylene Ballistic Single Fibers.” 339-344.[/tab]
[tab title=2017]
1 Jenket, D. Forster, A. Paulter, N. Weerasooriya, T. Gunnarsson, C. and Al-Sheikhly, M. (2017) “An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers.”
2 Sockalingam, S. Gillespie, J. Casem, D. and Weerasooriya, T. (2017) “High Strain Rate Transverse Compression Response of Ballistic Single Fibers.”
3 Sockalingam, S. McDaniel, P. Gillespie, J. and Weerasooriya, T. (2017) “High Strain Rate Transverse Compression Response of Ballistic Fibers.”[/tab]
[tab title=2016]
1 McDaniel, P. Deitzel, J. and Gillespie, J. (2016) “A Single Fiber Peel Test to Measure Fibrillary Interactions in Ultra High Molecular Weight Polyethylene Fibers.”
2 Sockalingam, S. and Gillespie, J. (2016) “Transverse impact of ballistic fibers and yarns – fiber length-scale modeling and experiments.”
3 Sockalingam, S. Gillespie, J. Keefe, M. Casem, D. and Weerasooriya, T. (2016) “Transverse Compression Response of Ultra-High Molecular Weight Polyethylene Single Fibers.” 7-17.
4 Sockalingam, S. Gillespie, J. and Keefe, M. (2016) “Role of Inelastic Transverse Compressive Behavior on Kevlar KM2 Single Fiber Transverse Impact.”
5 Sockalingam, S. Keefe, M. and Gillespie, J. (2016) “Transverse Compression Response of Ultra-High Molecular Weight Polyethylene Single Fibers.”
6 Sockalingam, S. McDaniel, P. and Gillespie, J. (2016) “Understanding the Evolution in Meso/Nanostructure in UHMWPE Fibers.”[/tab]
[tab title=2015]
1 Chowdhury, S. C. Haque, B. Z. van Duin, A. Bogetti, T. and Gillespie, J. (2015) “Study of the Mechanical Properties of Kevlar Fibril using Molecular Dynamics Simulations.”
2 Chowdhury, S. C. Sockalingam, S. and Gillespie, J. (2015) “Molecular Dynamics Modeling of Compression Kinking in Kevlar.”
3 Chowdhury, S. C. Staniszewski, J. Martz, E. Ganesh, R. Sockalingam, S. Haque, B. Z. Bogetti, T. and Gillespie, J. (2015) “A Computational Approach for Linking Molecular Dynamics to Finite Element Simulation of Polymer Chains in Polyethylene Fibers.”
4 Haque, B. Z. Ali, M. and Gillespie, J. (2015) “Modeling Constant Velocity Transverse Impact on UHMWPE Soft Ballistic Sub-Laminate.”
5 Haque, B. Z. Ali, M. and Gillespie, J. (2015) “Modeling Transverse Impact on Multi-Layer UHMWPE Soft Ballistic Armor Pack (SBAP).”
6 Sockalingam, S. Bremble, R. Chowdhury, S. C. Gillespie, J. and Keefe, M. (2015) “Modeling Kevlar KM2 Single Fiber Transverse Impact and the Effect of Compressive Kinking on Residual Tensile Strength.”
7 Sockalingam, S. Gillespie, J. and Keefe, M. (2015) “Transverse Compression Behavior of Kevlar KM2 Fiber – Experimental Testing and Finite Element Analysis.”[/tab]
[tab title=2014]
1 Haque, B. Z. Ali, M. and Gillespie, J. (2014) “Modeling Transverse Impact on Soft Body Armor Pack.”
2 McAllister, Q. Gillespie, J. and VanLandingham, M. (2014) “Experimental Measurement of the Energy Dissipative Mechanisms of the Kevlar Micro-fibrillar Network for Multi-scale Application.”
3 Sockalingam, S. Gillespie, J. and Keefe, M. (2014) “Fiber-Level Tow Modeling of Kevlar KM2 Subjected to High Velocity Impact.”
4 Sockalingam, S. Gillespie, J. and Keefe, M. (2014) “Inelastic Transversely Isotropic Constitutive Model for High Performance Polymer Fibers.”[/tab]
[tab title=2013]
Sockalingam, S. Gillespie, J. and Keefe, M. (2013) “Modeling the Transverse Compression Response of Kevlar KM2.” 7-13.[/tab]
[tab title=2012]
1 Haque, B. Z. McAllister, Q. Chowdhury, S. C. Caulfield, A. Gillespie, J. Bogetti, T. and VanLandingham, M. (2012) “Modeling the Nanoindentation Mechanics of Kevlar Fibers.”
2 McAllister, Q. Gillespie, J. and VanLandingham, M. (2012) “Probing the Surface Properties of High Performance Fibers.”
[/tab][/tabs]
