Publications

  1. Jake M. Diamond and K.T. Ramesh, “Spallation of polycarbonate on nanosecond timescales,” Phys. Rev. E, accepted for publication, 2025.
  2. G. Simpson, J. Grant, T.P. Weihs, and K.T. Ramesh, “Size-Dependent Fragment Shape in High-Velocity Anvil Impact of Spherical Metal Powder-Compacts,” Acta materialia, accepted for publication, 2025.
  3. Angela Stickle and the DART Team, “Dimorphos’ Material Properties and Estimates of Crater Size from the DART Impact,” Planetary Science Journal, in press, 2025.
  4. A. Gupta, K.T. Ramesh, and Ryan Hurley. “Instabilities in Granular Media: Particle Dynamics and Stress Fluctuations,” Journal of the Mechanics and Physics of Solids, 193, #105843, 2024.
  5. K. Upadhyay, R. Jagani, D.G. Giovanis, A. Alshareef, A.K. Knutsen, C.L. Johnson, A. Carass, P.V. Bayly, M.D. Shields, and K.T. Ramesh, “Effect of Human Head Shape on the Risk of Traumatic Brain Injury: A Gaussian Process Regression-Based Machine Learning Approach,” Military Medicine, 189 (S3), pp. 608-617, 2024.
  6. Liuchi Li, V. Kilic, M. Alemohammad, K.T. Ramesh, M. Foster, and T.C. Hufnagel, “Shack-Hartmann wavefront sensing: A new approach to time-resolved measurement of the stress intensity factor during dynamic fracture,” Mechanics of Materials, Vol. 194, Art. No. 105010, 2024.
  7. G. Simpson, J. Moreno, M. Shaeffer, and K.T. Ramesh, “A High-Rate, Impact-Driven Biaxial Fragmentation Experiment for Ductile Materials,” Mechanics of Materials, Vol. 198, Art. No. 105102, 2024.
  8. Velat Kilic, Christopher S. DiMarco, Jacob M. Diamond, Pinghan Chu, K. T. Ramesh, Zhehui Wang, and Mark A. Foster, “Time Lens Photon Doppler Velocimetry (TL-PDV) for extreme measurements,” Nature Communications, Vol. 15, Article number: 7732, 2024.
  9. A. Lucchetti, et al., “Fast boulder fracturing by thermal fatigue detected on stony asteroids,” Nature Communications, Vol. 15, Article number: 6206, 2024.
  10. K. Upadhyay, J. Fuhg, N. Bouklas, and K.T. Ramesh, “Physics-informed Data-driven Discovery of Constitutive Models with Application to Strain-Rate-sensitive Soft Materials,” Computational Mechanics, 2024. https://doi.org/10.1007/s00466-024-02497-x
  11. J.M. Diamond and K.T. Ramesh, “Automated analysis of photonic Doppler velocimetry spall signals,” Journal of Dynamic Behavior of Materials, in press, 2024. https://doi.org/10.1007/s40870-024-00427-9
  12. Aaron S. Baumgarten, Justin Moreno, Brett Kuwik, Sohanjit Ghosh, Ryan Hurley, K.T. Ramesh, “A predictive model for fluid-saturated, brittle granular materials during high-velocity impact events,” Journal of the Mechanics and Physics of Solids, 187, #105644, 2024.
  13. Liuchi Li, J. Rao, T. Hufnagel, and K.T. Ramesh, “Meso-scale size effects of material heterogeneities on crack propagation in brittle solids: Perspectives from phase-field simulations,” International Journal of Solids and Structures, 296, # 112795, 2024.
  14. S.E. Prameela, C.C. Walker, C.S. DiMarco, D.D. Mallick, X. Sun, S. Hernandez, T. Sasaki, J.W. Wilkerson, K.T. Ramesh, G.M. Pharr, and T.P. Weihs, “High-throughput quantification of quasistatic, dynamic and spall strength of materials across 10 orders of strain rates,” PNAS Nexus, Vol. 3, No. 5, pg. 148, 2024.
  15. C. Bradfield, L. Voo, A. Bhaduri, and K.T. Ramesh, “Validation of a Computational Biomechanical Mouse Brain Model for Rotational Head Acceleration,” Biomechanics and Modeling in Mechanobiology, 2024. https://doi.org/10.1007/s10237-024-01843-5
  16. A. Gupta, K.T. Ramesh, and R.C. Hurley, “An Inclusion Model for Predicting Granular Elasticity Incorporating Force Chain Mechanics,” Granular Matter, Vol. 26, No. 2, pp. 26-40, 2024.
  17. Nancy L. Chabot and the DART Team, “Achievement of the Planetary Defense Investigations of the Double Asteroid Redirection Test (DART) Mission,” Planetary Science Journal, pp. 5:49, February 2024. https://doi.org/10.3847/PSJ/ad16e6
  18. C. Bradfield, L. Voo, D. Drewry, V. Koliatsos, and K.T. Ramesh, “Dynamic Strain Fields of the Mouse Brain During Rotation,” Biomechanics and Modeling in Mechanobiology, 2023. DOI:10.1007/s10237-023-01781-8.
  19. YunHo Kim, Minju Kang, Gary Simpson, Matthew Shaeffer, Justin Moreno, Daniel Magagnosc, L. J. Kecskes, J. T. Lloyd, and K. T. Ramesh, “Anisotropic debris cloud formation after hypervelocity impact into rolled magnesium alloy plates,” International Journal of Impact Engineering, Vol. 182, Art. 104754, 2023.
  20. G. Simpson, J. Moreno, M. Shaeffer, and K.T. Ramesh, “First Contact: Fine Structure of the Impact Flash and Ejecta during Hypervelocity Impact,” Proceedings of the National Academy of Sciences Nexus, Vol. 2, Issue 7, pgad214, 2023. https://doi.org/10.1093/pnasnexus/pgad214.
  21. J.W. McCauley and K.T. Ramesh, “Institutional and technical history of requirements-based strategic armor ceramics basic research leading up to the multiscale material by design materials in extreme dynamic environments (MEDE) program. Part II: Dynamic effects on the physics and mechanisms of advanced ceramics such as boron carbide,” International Journal of Ceramic Engineering and Science, 5:e10178, 2023. DOI:10.1002/ces2.10178.
  22. M. Eminizer, S. Tabrisky, C. DiMarco, J. Diamond, K.T. Ramesh, T. C. Hufnagel, T.M. McQueen, and D. Elbert, “OpenMSIStream: A Python package for facilitating integration of streaming data in diverse laboratory environments,” Journal of Open Source Software, 8(83), 896, 2023. https://doi.org/10.21105/joss.04896.
  23. A. Zare, P. Malhotra, B. Yang, K. Hu, J. Du, M. Shaeffer, R. Haber, and K.T. Ramesh, “The effects of microstructure and inclusion distributions on dynamic failure processes in boron carbide ceramics,” Journal of the American Ceramic Society, Vol. 106, pp. 4831–4851, 2023.
  24. Shamseddin Akhondzadeh, Minju Kang, Ryan B. Sills, K.T. Ramesh, and Wei Cai, “Direct Comparison between Experiments and Dislocation Dynamics Simulations of High-Rate Deformation of Single Crystal Copper,” Acta materialia, Vol. 250, Art. No. 118851, 2023.
  25. N. Mitra and K.T. Ramesh, “Physics of Molecular Deformation Mechanisms in 6H-SiC,” Modeling and Simulation in Materials Science & Engineering, Vol. 31, No. 3, Art. No. 035006, 2023.
  26. Christopher S. DiMarco, Peter Lim, Debjoy Mallick, Laszlo Kecskes, Timothy Weihs, and K.T. Ramesh, “Spall failure of ECAE Mg-Al alloys at extreme strain rates: influence of microstructure,” Metals, Vol. 13, No. 3, Article No. 454, 2023.
  27. Daly, R.T., Ernst, C.M., Barnouin, O.S. et al., “Successful Kinetic Impact into an Asteroid for Planetary Defense,” Nature, Vol. 616, No. 7957, pg. 443, (2023). https://doi.org/10.1038/s41586-023-05810-5.
  28. X. Sun, B.S. Kuwik, Q. Yang, S. Chocron, R.C. Hurley, R.A. Haber, J.C. LaSalvia, and K.T. Ramesh, “Effects of Particle Size, Shape and Loading Rate on the Normal Compaction of an Advanced Granular Ceramic,” Powder Technology, Vol. 417, Art. No. 118243, 2023.
  29. Dung-Yi Wu, Chengyun Miao, Christopher DiMarco, Debjoy D. Mallick, K.T. Ramesh, and Todd C. Hufnagel, “Microstructural effects on the spall failure of 7085 aluminum alloy,” Materials Science and Engineering A, Vol. 866, 144674, 2023.
  30. X. Sun, D.-Y. Wu, M. Kang, K.T. Ramesh, and L.J. Kecskes, “Properties and Hardening Behavior of Equal Channel Angular Extrusion Processed Mg-Al Binary Alloys,” Materials Characterization, Vol. 195, 112514, 2023.
  31. K. Upadhyay, A. Alshareef, A.K. Knutsen, C.L. Johnson, A. Carass, P.V. Bayly, D.L. Pham, J.L. Prince, and K.T. Ramesh, “Development and Validation of Subject-Specific 3D Human Head Models Based on a Nonlinear Visco-Hyperelastic Constitutive Framework,” Journal of the Royal Society-Interface, Vol. 19, No. 195, Art. 20220561, 2022. DOI: 10.1098/rsif.2022.0561
  32. D. Kempesis, L. Iannucci, K.T. Ramesh, S. Del Rosso, P.T. Curtis, D. Pope, and P.W. Duke, “Micromechanical analysis of high fibre volume fraction polymeric laminates using micrograph-based representative volume element models,” Composites Science & Technology, Vol. 229, Art. 109680, 2022. DOI: 10.1016/j.compscitech.2022.109680
  33. K. Upadhyay, D.G. Giovanis, A. Alshareef, A.K. Knutsen, C.L. Johnson, A. Carass, P.V. Bayly, M.D. Shields, and K.T. Ramesh, “Data-driven Uncertainty Quantification in Computational Human Head Models,” Computer Methods in Applied Mechanics and Engineering, Vol. 398, Art. 115108, 2022. DOI: 10.1016/j.cma.2022.115108
  34. J. Parker, Y.T. Tracy Ling, and K.T. Ramesh, “Effect of Microstructure on the Dynamic Behavior of Ultra-high-molecular-weight polyethylene (UHMWPE) Composites,” Composites Part A, Vol. 156, Article No. 106833, 2022. DOI: 10.1016/j.compositesa.2022.106833
  35. Arezoo Zare, Mo-Rigen He, Michael Straker, M.V.S. Chandrashekhar, Michael Spencer, Kevin J. Hemker, James W. McCauley, and K.T. Ramesh, “Mechanical Characterization of Boron Carbide Single Crystals,” Journal of the American Ceramic Society, Vol. 105, No. 5, pp. 3657-3657, 2022. DOI: 10.1111/jace.18065.
  36. KT Ramesh, Lori Graham-Brady, Bill Goddard, Ryan Hurley, Mark Robbins, Andrew Tonge, Amartya Bhattacharjee, Joel T. Clemmer, Qinglei Zeng, Weixin Li, Yidi Shen, Qi An, and Nilanjan Mitra, “Models for the behavior of boron carbide in extreme dynamic environments,” Journal of the American Ceramic Society, Vol. 105, No. 5, pp.3043-3061, 2022. http://doi.org/10.1111/jace.18071.
  37. A. Alshareef, A. K. Knutsen, C. L. Johnson, A. Carass, K. Upadhyay, P. V. Bayly, D. L. Pham, J. L. Prince, and K.T. Ramesh, “Integrating Material Properties from Magnetic Resonance Elastography into Subject-Specific Computational Models for the Human Brain,” Brain Multiphysics, Vol. 2, No. 100038, 2021. DOI: 10.1016/j.brain.2021.100038
  38. M. Kang, K. Hazeli, K.Y. Xie, N. Dixit, K.J. Hemker, and K.T. Ramesh, “The mechanical behavior of single crystal and polycrystalline pure magnesium,” Mechanics of Materials, Vol. 163, Art. 104078, 2021. DOI: 10.1016/j.mechmat.2021.104078
  39. S.P. Joshi, Q. Wei, T.C. Hufnagel, J. Wilkerson, J. El-Awady, J. Kimberley, B. Ravaji, and K.T. Ramesh, “Insights from the MEDE Program: An Overview of Microstructure-Property Linkages in the Dynamic Behaviors of Magnesium Alloys,” Mechanics of Materials, Vol. 163, Art. 104084, 2021. DOI: 10.1016/j.mechmat.2021.104084
  40. D.D. Mallick, S.E. Prameela, D. Ozturk, C.L. Williams, M. Kang, G.M. Valentino, J.T. Lloyd, J.W. Wilkerson, T.P. Weihs, and K.T. Ramesh, “Spall Strength in Pure and Alloyed Magnesium: A Compendium of Research Efforts from the CMEDE 10-Year Effort,” Mechanics of Materials, Vol. 162, Art. 104065, 2021. DOI: 10.1016/j.mechmat.2021.104065
  41. Kelvin Xie, Kavan Hazeli, Neha Dixit, Kevin Hemker, & K.T. Ramesh, “{10-12} Twin boundary migration mechanisms in quasi-statically compressed and plate-impacted Mg single crystals,” Science Advances, Vol. 7, No. 42, 2021. DOI: 10.1126/sciadv.abg3443
  42. P.V. Bayly, A. Alshareef, A.K. Knutsen, K. Upadhyay, R.J. Okamoto, A. Carass, J.A. Butman, D.L. Pham, J.L. Prince, K.T. Ramesh, C.L. Johnson, “MR imaging of human brain mechanics in vivo: New measurements and applications to the development of computational models of brain injury,” Annals of Biomedical Engineering, Vol. 49, No. 10, pp.2677-2692, 2021. DOI: 10.1007/s10439-021-02820-0.
  43. W. Li and K.T. Ramesh, “A finite deformation framework for mechanism-based constitutive models of the dynamic behavior of brittle materials,” Journal of the Mechanics and Physics of Solids, Vol. 155, Art. 104518, 2021. DOI: 10.1016/j.jmps.2021.104518
  44. Adyota Gupta, Ryan Crum, Chongpu Zhai, K.T. Ramesh, and Ryan Hurley, “Quantifying particle-scale 3D granular dynamics during rapid compaction from time-resolved in-situ 2D X-ray images,” Journal of Applied Physics, Vol. 129, No. 22, 2021. DOI: 10.1063/5.0051642
  45. S.E. Prameela, T.P. Weihs, and K.T. Ramesh, “Young scholars benefit from research collaboration,” Nature Materials, (reference number: NM21030924), 2021. DOI:10.1038/s41563-021-01009-z
  46. Q. Zeng, J.W. McCauley and K.T. Ramesh, “A mechanism-based model for the impact response of quartz,” Journal of Geophysical Research: Solid Earth, Vol. 126, No. 3, Article e2020JB020209, 2021. DOI: 10.1029/2020JB020209.
  47. M. Zhao and K.T. Ramesh, “Deformation and failure mechanisms in a magnesium alloy under uniaxial compressive loading,” Journal of Dynamic Behavior of Materials, Vol. 6, pp. 303-316, 2020.
  48. D. D. Mallick, J. Parker, J.W. Wilkerson, and K.T. Ramesh, “Estimating Void Nucleation Statistics in Laser-Driven Spall,” Journal of Dynamic Behavior of Materials, Vol. 6 (3), pp. 268-277, 2020.
  49. C.L. Williams, C. Kale, S.A. Turnage, L. Shannahan, P. Rigg, B. Li, K. Solanki, R. Becker, T.C. Hufnagel, and K.T. Ramesh, “Real-time observation of twinning-detwinning in shock compressed magnesium via time-resolved in situ synchrotron XRD experiments,” Physical Review Materials, Vol. 4, No. 8, Art. 083603, 2020.
  50. M. Kang, W. Li, A.F.T. Leong, M. Guan, K. Fezzaa, J.T. Harris, K.T. Ramesh, and T.C. Hufnagel, “Crack nucleation and growth during dynamic indentation of chemically-strengthened glass,” Extreme Mechanics Letters, Vol. 38, No. 100754, 2020.
  51. X. Sun, A. Chauhan, D. Mallick, A.L. Tonge, J.W. McCauley, K.J. Hemker, J. LaSalvia, and K.T. Ramesh, “Granular flow of an advanced ceramic under ultra-high strain rates and high pressures,” Journal of the Mechanics and Physics of Solids, Vol. 143, Article No. 104031, 2020. DOI: 10.1016/j.jmps.2020.104031
  52. D. D. Mallick and K.T. Ramesh, “Dynamic Fragmentation of Boron Carbide Using Laser-Driven Flyers,” International Journal of Impact Engineering, Vol. 136, 103416, 2020.
  53. A.M. Dagro and K.T. Ramesh, “A mechanism for injury through cerebral arteriole inflation,” Biomechanics and Modeling in Mechanobiology, Vol. 18, No. 3, pp. 651-663, 2019.
  54. Chauhan, X. Sun, K.T. Ramesh and K.J. Hemker, “Dynamic failure mechanisms of granular boron carbide under multi-axial high-strain-rate loading,” Scripta materialia, Vol. 173, pp. 125-128, 2019.
  55. A.M. Dagro, L. Rajbhandari, S. Orrego, S.H. Kang, A. Venkatesan, and K.T. Ramesh, “Quantifying the Local Mechanical Properties of Cells in a Fibrous Three-Dimensional Microenvironment,” Biophysical Journal, Vol. 117, 817–828, 2019. DOI: https://doi.org/10.1016/j.bpj.2019.07.042
  56. A.M. Dagro and K.T. Ramesh, “Nonlinear contact mechanics for the indentation of hyperelastic cylindrical bodies,” Mechanics of Soft Materials, Vol. 1:7, 2019. DOI: https://doi.org/10.1007/s42558-019-0006-0
  57. Madouh, F.A. and Ramesh, K.T., “The influence of shear anisotropy in mTBI: a white matter constitutive model,” Annals of Biomedical Engineering, Vol. 47, No. 9, pp. 1960-1970, 2019.
  58. V. Kannan, X. Ma, N. M. Krywopusk, L. J. Kecskes, T.P. Weihs and K. T. Ramesh, “The effect of strain rate on the mechanisms of plastic flow and failure of an ECAE AZ31B magnesium alloy,” Journal of Materials Science, Vol. 54, No. 20, pp. 13394-13419, 2019.
  59. C. El Mir, M. Delbo and K.T. Ramesh, “The efficiency of thermal fatigue in regolith generation on small airless bodies,” Icarus, Vol. 333, pp. 356-370, 2019.
  60. Q. Zeng, A.L. Tonge and K.T. Ramesh, “A multi-mechanism constitutive model for the dynamic failure of quasi-brittle materials. Part II - An integrative model,” Journal of the Mechanics and Physics of Solids, Vol. 131, pp. 20-42, 2019.
  61. Q. Zeng, A.L. Tonge and K.T. Ramesh, “A multi-mechanism constitutive model for the dynamic failure of quasi-brittle materials. Part I – Amorphization as a failure mode,” Journal of the Mechanics and Physics of Solids, Vol. 130, pp. 370-392, 2019.
  62. D. D. Mallick, M. Zhao, J. Parker, V. Kannan, B. T. Bosworth, D. Sagapuram, M. A. Foster and K.T. Ramesh, “Laser-Driven Flyers and Nanosecond-Resolved Velocimetry for Spall Studies in Thin Metal Foils,” Experimental Mechanics, Vol. 59, No. 5, pp. 611-628, 2019. DOI: https://doi.org/10.1007/s11340-019-00519-x
  63. Y.-C. Lu, N.P. Daphalapurkar, A.K. Knutsen, J. Glaister, D.L. Pham, J.A. Butman, J.L. Prince, P.V. Bayly, and K.T. Ramesh, “A 3D Computational Head Model of Dynamic Head Rotation and Head Extension validated using Live Human Brain Data, including the Falx and Tentorium,” Annals of Biomedical Engineering, Vol. 47, No. 9, pp. 1923-1940, 2019. https://doi.org/10.1007/s10439-019-02226-z
  64. A.F.T. Leong, E. Asare, R. Rex, X.H. Xiao, K.T. Ramesh and T.C. Hufnagel, “Determination of size distributions of non-spherical pores or particles from single x-ray phase contrast images,” Optics Express, Vol. 27, No. 12, pp. 17322-17347, 2019.
  65. Krimsky, E., Hogan, J.D., Bratcher, M.S., Foster, M., and Ramesh, K.T., “Quantification of Damage and its Effects on the Compressive Strength of an Advanced Ceramic,” Engineering Fracture Mechanics, Vol. 208, pp. 107-118, 2019.
  66. Q. Zeng, M.H. Motamedi, A.F.T. Leong, N.P. Daphalapurkar, T.C. Hufnagel and K.T. Ramesh, “Validated simulations of dynamic crack propagation in single crystals using EFEM and XFEM,” International Journal of Fracture, Vol. 215, No. 1-2, pp: 49-65, 2019. https://doi.org/10.1007/s10704-018-0330-7
  67. D.D. Mallick, M. Zhao, B.T. Bosworth, B. Schuster, M.A. Foster, and K.T. Ramesh, “A Simple Dual-Beam Time-Multiplexed Photon Doppler Velocimeter for Pressure-Shear Plate Impact Experiments,” Experimental Mechanics, Vol. 59, pp. 41-49, 2019.
  68. El Mir, C., Ramesh, K.T., and Richardson, D.C., “A new hybrid framework for simulating hypervelocity asteroid impacts and gravitational re-accumulation,” Icarus, Vol. 321, pp. 1013-1025, 2019.
  69. Korimilli, E. & Ramesh, K.T., “Hardness and mechanical anisotropy of hexagonal SiC single crystal polytypes,” Journal of Alloys and Compounds, Vol. 770, pp. 158-165, 2019.
  70. N.P. Daphalapurkar, S. Patil, T. Nguyen, E.P. Korimilli and K.T. Ramesh, “A Crystal Plasticity Model for Body-centered Cubic Molybdenum: Experiments and Simulations,” Materials Science and Engineering A, Volume 738, pp. 283-294, 2018.
  71. A.F.T. Leong, A.K. Robinson, K. Fezzaa, T. Sun, N. Sinclair, D.T. Casem, P.K. Lambert, C.J. Hustedt, N.P. Daphalapurkar, K.T. Ramesh and T.C. Hufnagel, “Quantitative in situ studies of dynamic fracture in brittle solids using dynamic X-ray phase contrast imaging,” Experimental Mechanics, Volume 58, No. 9, pp 1423–1437, 2018.
  72. C.J. Hustedt, P.K. Lambert, E.L. Huskins-Retzlaff, D.T. Casem, M.W. Tate, H.T. Philipp, A.R. Woll, P. Purohit, J.T. Weiss, S.M. Gruner, V. Kannan, K.T. Ramesh, and T.C. Hufnagel, “In situ time-resolved measurements of extension twinning during dynamic compression of polycrystalline magnesium,” Journal of Dynamic Behavior of Materials, Vol. 4, pp. 222-230, 2018.
  73. M. Zhao, V. Kannan and K.T. Ramesh, “The dynamic plasticity and dynamic failure of a magnesium alloy under multiaxial stress states,” Acta materialia, Vol. 154, pp. 124-136, 2018.
  74. V. Kannan, K. Hazeli, and K.T. Ramesh, “The Mechanics of Dynamic Twinning in Single Crystal Magnesium," Journal of the Mechanics and Physics of Solids, Vol. 120, pp. 154-178, 2018.
  75. K. Hazeli, C. El Mir, S. Papanikolaou, M. Delbo and K.T. Ramesh, “The Origins of Asteroidal Rock Disaggregation: Interplay of Thermal Fatigue and Microstructure,” Icarus, Vol. 304, pp. 172-182, 2018.
  76. S. Ganpule, N.P. Daphalapurkar and K.T. Ramesh, “Effect of bulk modulus in computational predictions of mild TBI,” Shock Waves, Vol. 28, No. 1, pp. 127-139, 2018.
  77. R.S. Ayyagari, N.P. Daphalapurkar, and K.T. Ramesh, “The effective compliance of spatially evolving planar wing-cracks,” Journal of the Mechanics and Physics of Solids, Vol. 111, pp. 503-529, 2018.
  78. F. Wang, K. Hazeli, K.D. Molodov, C.D. Barrett, T. Al-Samman, D.A. Molodov, A. Kontsos, K.T. Ramesh, H. El Kadiri, and S.R. Agnew, “Characteristic dislocation substructure in {101 ̅2} twins in hexagonal metals,” Scripta materialia, Vol. 143, pp. 81-85, 2018.
  79. B. Cao, M. Shaeffer, D. Cadel, S. Prasad and K.T. Ramesh, “An analysis of strengthening mechanisms and rate-dependence in a high strength aluminum alloy,” Journal of Dynamic Behavior of Materials, Vol. 4, No. 1, pp. 6-17, 2018. DOI: 10.1007/s40870-017-0136-0.
  80. Tonge, A.L. and Ramesh, K.T., “Corrigendum: Multi-scale defect interactions in high-rate brittle material failure. Part I: Model formulation and application to AION (vol 86, pg. 117, 2016),” Journal of the Mechanics and Physics of Solids, Vo. 106, pp. 313-314, 2017.
  81. Farbaniec, L., Williams, C.L., Kecskes, L., Becker, R. and Ramesh, K.T., “Spall response and failure mechanisms associated with a hot-extruded AMX602 Mg alloy,” Materials Science and Engineering A, Vol. 707, pp. 725-731, 2017.
  82. K. Y. Xie, V. Domnich, L. Farbaniec, K. Kuwelkar, J. W. McCauley, R.A. Haber & K.T. Ramesh, “Microstructural Characterization of Boron-rich Boron Carbide,” Acta materialia, Vol. 136, pp. 202-214, 2017.
  83. K.T. Ramesh, A.M. Stickle, and J. Kimberley, “Rocks, Shocks and Asteroids, and Some Interesting Research Directions in Mechanics,” Experimental Mechanics, Vol. 57, No. 8, pp. 1149-1159, 2017.
  84. S. Ganpule, N.P. Daphalapurkar, K.T. Ramesh, A.K. Knutsen, D.L. Pham, P.V. Bayly, and J.L. Prince, “A 3D Computational Human Head Model that Captures Live Human Brain Dynamics,” Journal of Neurotrauma, Vol. 34, No. 13, pp. 2154-2166, 2017.
  85. Dixit, N., Farbaniec, L., & Ramesh, K.T., “Twinning in single crystal magnesium under microsecond impact along the <a> axis,” Materials Science and Engineering A, Vol. 693, pp. 22-25, 2017. DOI: 10.1016/j.msea.2017.03.074
  86. J.D. Hogan, D. Mallick, V. Domnich, K. Kuwelkar, J. W. McCauley, L. Farbaniec, K.T. Ramesh, T. Sano, “Fragmentation of an Advanced Ceramic under Ballistic Impact: Mechanisms and Microstructure,” Int. Journal of Impact Engineering, Vol. 102, pp. 47-54, 2017. DOI:10.1016/j.ijimpeng.2016.12.008.
  87. Lamberson, L and K.T. Ramesh, “Dynamic Electromechanical Behavior of Single-Crystal Alpha-Quartz,“ International Journal of Impact Engineering, Vol. 110, pp. 338-345, 2017.
  88. Farbaniec, L., J. D. Hogan, K. Y. Xie, M. Shaeffer, K. J. Hemker & K. T. Ramesh, “Damage evolution of hot-pressed boron carbide under confined dynamic compression,” International Journal of Impact Engineering, Vol. 99, pp. 75-84, 2017. DOI: 10.1016/j.ijimpeng.2016.09.008.
  89. J.W. Wilkerson and K.T. Ramesh, “Unraveling the anomalous grain size dependence of cavitation,” Physical Review Letters, 117, 215503, 2016.
  90. James D. Hogan, Nitin Daphalapurkar, & K.T. Ramesh, “On Compressive Brittle Fragmentation,” Journal of American Ceramic Society, Vol. 99, No. 6, pp. 2159-2169, 2016. DOI: 10.1111/jace.14171
  91. Lukasz Farbaniec, J.W. McCauley, James D. Hogan & K.T. Ramesh, “Anisotropy of mechanical properties in a hot-pressed boron carbide,” International Journal of Applied Ceramic Technology, 1-9, 2016. DOI:10.1111/ijac.12585
  92. C. Mo, B. Wisner, M. Cabal, K. Hazeli, K.T. Ramesh, H. El Kadiri, T. Al-Samman, D. Molodov, K. Molodov, A. Kontsos, “Acoustic Emission of Deformation Twinning in Magnesium,” Acoustic Waves in Advanced Materials, 9, 662, 2016. Doi:10.3390/ma9080662.
  93. Farbaniec, C. L. Williams, L. Kecskes, K. T. Ramesh, & R. Becker, “Microstructural Effects on the Spall Properties of ECAE-processed AZ31B Magnesium Alloy,” International Journal of Impact Engineering, Vol. 98, pp. 34-41, 2016.
  94. N.S. Carey, T. Budavari, N. Daphalapurkar, & K.T. Ramesh, “Data Integration for Materials Research,” Integrating Materials and Manufacturing Innovation, Vol. 5, No. 7, 2016. DOI: 10.1186/s40192-016-0049-0.
  95. Bentil, S.L., Ramesh, K.T., & Nguyen, T.D., “A dynamic inflation test for soft materials,” Experimental Mechanics, Vol. 56, No. 5, pp: 759-769, 2016. DOI: 10.1007/s11340-015-0122-1
  96. J.N. Florando, B.S. El-Dasher, C.Q. Chen, D.C. Swift, N.R. Barton, J. McNaney, K.T. Ramesh, K.J. Hemker and M. Kumar, “Effect of Strain Rate and Dislocation Density on the Twinning Behavior in Tantalum,” AIP Advances, Vol. 6, No. 4, 045120, 2016. DOI: http://dx.doi.org/10.1063/1.4948528.
  97. J. Wilkerson & K.T. Ramesh, “A closed-form criterion for dislocation emission in nano-porous materials under arbitrary thermomechanical loading," Journal of the Mechanics and Physics of Solids, Vol. 86, pp. 94-116, 2016.
  98. A.L. Tonge, K.T. Ramesh & O. Barnouin, “A Model for Impact-Induced Lineament Formation and Porosity Growth on Eros,” Icarus, Vol. 266, pp. 76-87, 2016.
  99. James D. Hogan, Lukasz Farbaniec, Tomoko Sano, Matt Shaeffer, & K.T. Ramesh, “The effects of defects on the uniaxial compressive strength and failure of an advanced ceramic,” Acta Materialia, Vol. 102, pp. 263-272, 2016.
  100. A.L. Tonge & K.T. Ramesh, “Multi-scale defect interactions in high-rate failure of brittle materials, Part II: Application to design of protection materials,” Journal of the Mechanics and Physics of Solids, Vol. 86, pp. 237-258, 2016.
  101. A.L. Tonge & K.T. Ramesh, “Multi-scale defect interactions in high-rate brittle material failure. Part I: Model formulation and application to AlON,” Journal of the Mechanics and Physics of Solids, Vol. 86, pp. 117-149, 2016.
  102. Kubair, D.V., Ramesh, K.T. & Swaminathan, P.K., “Effect of shear-void-growth-softening on adiabatic shear-band-spacing in ductile materials,” Acta mech., Vol.226, No.12, pp. 4189-4206, 2015.
  103. J.D. Hogan, J. Kimberley, K. Hazeli, J. Plescia & K.T. Ramesh, “Dynamic Behavior of an Ordinary Chondrite: The Effects of Microstructure on Strength, Failure and Fragmentation,” Icarus, Vol. 260, pp: 308-319, 2015.
  104. Meulbroek Fick, J., Ramesh, K.T. & Swaminathan, P.K., “Modeling of ductile fragmentation that includes void interactions,” Journal of the Mechanics and Physics of Solids, Volume 85, Pages 54–73, 2015.
  105. A.J. Fournier, J.D. Hogan, L. Rajbhandari, S. Shrestha, A. Venkatesan & K. T. Ramesh, “Changes in Neurofilament and Microtubule Distribution following Focal Axon Compression,” PLoS One, Vol. 10, No. 6, pp. e0131617, 2015.
  106. G. Hu, Liu, J., Graham-Brady, L., & K.T. Ramesh, “A 3D Mechanistic Constitutive Model for Brittle Materials Containing Evolving Flaw Distributions under Dynamic Multiaxial Loading,” Journal of the Mechanics and Physics of Solids, Vol. 78, pp. 269-297, 2015.
  107. Lamberson and K.T. Ramesh, “Spatial and Temporal Evolution of Dynamic Damage in Single Crystal Alpha-Quartz,” Mechanics and Materials, Vol. 87, pp. 61-79, 2015.
  108. Farbaniec, James D. Hogan, & K.T. Ramesh, “Micromechanisms associated with the dynamic compressive failure of hot-pressed boron carbide,” Scripta Materialia, Vol. 106, pp. 52-56, 2015. DOI: 10.1016/j.scriptamat.2015.05.004.
  109. J.D. Hogan, L. Farbaniec, M. Shaeffer & K.T. Ramesh, “The effects of microstructure and confinement on the compressive fragmentation of an advanced ceramic,” Journal of the American Ceramic Society, Vol. 98, No. 3, pp. 902-912, 2015. DOI: 10.1111/jace.13353.
  110. N. Dixit, K.Y. Xie, K.J. Hemker & K.T. Ramesh, “Microstructural evolution of pure magnesium under high strain rate loading,” Acta materialia, Vol. 87, pp. 56-67, 2015.
  111. K.T. Ramesh, James D. Hogan, Jamie Kimberley, & Angela Stickle, “A Review of Mechanisms and Models for Dynamic Failure, Strength, and Fragmentation,” Planetary and Space Sciences, Vol. 107, pp. 10-23, 2015. http://dx.doi.org/10.1016/j.pss.2014.11.010.
  112. B. Cao, N.P. Daphalapurkar & K. T. Ramesh, “Ultra-High-Strain-Rate Shearing and Deformation Twinning in Nanocrystalline Aluminum,” Meccanica, Vol. 50, No. 2, pp. 561-574, 2015.
  113. T.W. Wright, Daphalapurkar, N. and K.T. Ramesh, “Stability of Ideal FCC Twin Boundaries,” Journal of the Mechanics and Physics of Solids, Vol. 73, pp. 228-241, 2014.
  114. E.P. Korimilli & K.T. Ramesh, “In-situ observations and quantification of twin boundary mobility in polycrystalline magnesium,” Materials Science & Engineering A, Vol. 617, pp. 121-126, 2014.
  115. Adam J Fournier, Labchan Rajbhandari, Shiva Shrestha, Arun Venkatesan & K. T. Ramesh, “In-Vitro and In Situ Visualization of Cytoskeletal Deformation under Load: Traumatic Axonal Injury,” FASEB Journal, Vol. 28, No. 12, pp. 5277-8720, 2014; doi:10.1096/fj.14-251942.
  116. P.K. Lambert, C.J. Hustedt, K.S. Vecchio, E.L. Huskins, D.T. Casem, S.M. Gruner, M.W. Tate, H.T. Philipp, A.R. Woll, P. Purohit, J.T. Weiss, V. Kannan, K.T. Ramesh, P. Kenesei, J.S. Okasinski, J. Almer, M. Zhao, A.G. Ananiadis, and T.C. Hufnagel, “Time-resolved x-ray diffraction techniques for bulk polycrystalline materials under dynamic loading,” Review of Scientific Instruments, 85, 093901 (2014). DOI: http://dx.doi.org/10.1063/1.4893881
  117. Jing Zhang, K.T. Ramesh, and Shailendra P. Joshi, “Stochastic Size Dependent Slip-Twinning Competition in Hexagonal Close Packed Single Crystals,” Modeling and Simulations in Materials Science and Engineering, Vol. 22, No. 7, Art. 075003 (24pp), 2014. doi:10.1088/0965-0393/22/7/075003.
  118. Wilkerson & K.T. Ramesh, “"A dynamic void growth model governed by dislocation kinetics," Journal of the Mechanics and Physics of Solids, Vol. 70, pp. 262–280, 2014. http://dx.doi.org/10.1016/j.jmps.2014.05.018
  119. C.L. Williams, C.Q. Chen, K.T. Ramesh, and D.P. Dandekar, “On the shock stress, substructure evolution, and spall response of commercially pure 1100-O aluminum,” Materials Science & Engineering A, No. 618, pp. 596-604, 2014. DOI: 10.1016/j.msea.2014.09.030.
  120. Marco Delbo, Guy Libourel, Justin Wilkerson, Naomi Murdoch, Patrick Michel, K. T. Ramesh, Clement Ganino, Chrystele Verati & Simone Marchi, “Regolith formation on small asteroids by thermal fragmentation,” Nature, Vol. 508, no. 7495, pp. 233-238, 2014. doi: 10.1038/nature13153
  121. N.P. Daphalapurkar, K.T. Ramesh & T.W. Wright, “Kinetics of a Fast Moving Twin Boundary in nickel,” Acta materialia, Vol. 68, no. 15, pp. 82-92, 2014. doi: 10.1016/j.actamat.2014.01.010.
  122. C. Q. Chen, J. N. Florando, M. Kumar, K.T. Ramesh & K. J. Hemker, “Incipient deformation twinning in dynamically sheared bcc Tantalum,” Acta materialia, Vol. 69, pp. 114-125, 2014. doi: 10.1016/j.actamat.2014.01.046.
  123. S. Agnew, W. Wittington, A. Oppedal, H. El Kadiri, M. Shaeffer, K.T. Ramesh, J. Bhattacharyya, R. Delorme & B. Davis, “Dynamic Behavior of a Rare-Earth-Containing Mg Alloy, WE43B-T5, Plate with Comparison to Conventional Alloy, AM30-F,” JOM, Vol. 66, No. 2, pp. 277-290, 2014. doi: 10.1007/s11837-013-0830-x.
  124. Eswar Prasad, B. Li, N. Dixit, M. Shaeffer, S.N. Mathaudhu & K.T. Ramesh, “The Dynamic Flow and Failure Behavior of Magnesium and Magnesium Alloys,” JOM, Vol. 66, No. 2, pp. 291-304, 2014. DOI: 10.1007/s11837-013-0850-6.
  125. R. Bhardwaj, K. Ziegler, J.H. Seo, K.T. Ramesh, T.D. Nguyen, “A Computational Model of Blast Loading on The Human Eye,” Biomechanics and Modeling in Mechanobiology, Vol. 13, pp. 123-140, 2014, DOI 10.1007/s10237-013-0490-3.
  126. Chen, C.Q., Hu, G., Florando, J.N., Kumar, M., Hemker, K.J., and Ramesh, K.T., “Interplay of dislocation slip and deformation twinning in tantalum at high strain rates,” Scripta Materialia, Vol. 69, No. 10, pp. 709-712, 2013. DOI: 10.1016/j.scriptamat.2013.07.010
  127. C. L. Williams, C. Q. Chen, K. T. Ramesh and D. P. Dandekar, “The effects of cold rolling on the microstructural and spall response of 1100 aluminum,” J. Appl. Phys. 114, 093502 (2013).
  128. Szlufarska, K.T. Ramesh & D.H. Warner, “Simulating Mechanical Behavior of Ceramics under Extreme Conditions,” Annual Reviews of Materials Research, Vol. 43, pp. 131-156, 2013.
  129. B.A. McWilliams, K.T. Ramesh & C.-F. Yen, “Probabilistic response of heterogeneous particle reinforced metal matrix composites with particle size dependent strengthening,” Computational Materials Science, Vol. 79, pp. 15–24, 2013.
  130. C.M. Byer & K.T. Ramesh, “Effects of the Initial Dislocation Density on Size Effects in Single Crystal Magnesium,” Acta Materialia, Vol. 61, No. 10, pp. 3808-3818, 2013.
  131. Zhang, Y. Sharon, J.A., Hu, G.L., Ramesh, K.T., Hemker, K.J., “Stress-driven grain growth in ultrafine grained Mg thin film,” Scripta Materialia, Vol. 68, No. 6, pp. 424-427, 2013. DOI: 10.1016/j.scriptamat.2012.11.013
  132. J. Kimberley, N. Daphalapurkar & K. T. Ramesh, “A scaling law for the dynamic strength of brittle solids,” Acta Materialia, Vol. 61, No. 9, pp. 3509-3521, 2013.
  133. Q. Wei, L.J. Kecskes & K.T. Ramesh, “Effects of Low-Temperature Rolling on the Propensity to Adiabatic Shear Banding of Commercial Purity Tungsten,” Materials Science & Engineering A, Vol. 58, pp. 394-401, 2013.
  134. R.M. Wright, A. Post, T.B. Hoshizaki and K.T. Ramesh, “A Multiscale Computational Approach to Estimating Axonal Damage under Inertial Loading of the Head,” Journal of Neurotrauma, Vol. 30, No. 2, pp. 102-118, 2013. DOI: 10.1089/neu.2012.2418
  135. J. W. McCauley, E. Strassburger, P. Patel, B. Paliwal and K.T. Ramesh, “Experimental Observations on Dynamic Response of Selected Transparent Armor Materials,” Experimental Mechanics, Vol. 53, pp. 3-29, 2013. DOI: 10.1007/s11340-012-9658-5
  136. Hu, G., Chen, C.Q., Ramesh, K.T. & McCauley, J.W., “Dynamic multiaxial response of a hot-pressed aluminum nitride,” Scripta materialia, Vol. 66, No. 8, pp. 527–530, 2012.
  137. C. L. Williams, D. P. Dandekar and K.T. Ramesh, “Spall Response of 1100-O Aluminum,” Journal of Applied Physics, Vol. 111, No. 12, Art. No. 123528, 2012.
  138. E. Huskins, B. Li, B. Cao & K.T. Ramesh, “Thermal Softening of an UFG Aluminum Alloy at High Rates,” Experimental Mechanics, Vol. 52, pp. 185–194, 2012. DOI 10.1007/s11340-011-9565-1.
  139. B. Li, S.P. Joshi, O. Almagri, Q. Ma, K.T. Ramesh, T. Mukai, “Rate-Dependent Hardening Due to Twinning in an Ultrafine-Grained Magnesium Alloy,” Acta materialia, Vol. 60, pp. 1818-1826, 2012.
  140. Hu, G., Chen, C.Q., Ramesh, K.T. & McCauley, J.W., “Mechanisms of dynamic deformation and dynamic failure in aluminum nitride,” Acta materialia, Vol. 60, pp. 3480–3490, 2012.
  141. R.M. Wright & K.T. Ramesh, “An Axonal Strain Injury Criterion for Traumatic Brain Injury,” Biomechanics and Modeling in Mechanobiology, Vol. 11, Issue: 1-2, pp. 245-260, 2012.  DOI: 10.1007/s10237-011-0307-1.
  142. Tonge, J. Kimberley and K.T. Ramesh, “The mechanism of compressive unloading failure in single crystal quartz and other brittle solids,” International Journal of Solids and Structures, Vol. 49, No. 26, pp. 3923-3934, 2012. DOI: 10.1016/j.ijsolstr.2012.08.021
  143. Daphalapurkar, N.P. & Ramesh, K.T., “Orientation dependence of the nucleation and growth of partial dislocations and possible twinning mechanisms in aluminum,” Journal of the Mechanics and Physics of Solids, 60 (2), pp. 277-294, 2012.
  144. J. Kimberley & K.T. Ramesh, “Dynamic Response of Transparent Ceramic MgAl2O4 Spinel,” Scripta Materialia, Vol. 65, No. 9, pp. 830-833, 2011.
  145. S. Hosmane, A. Fournier, R.M. Wright, L. Rajbhandari, K.T. Ramesh, A. Venkatesan &  N. Thakor, “Valve-Based Microfluidic Compression Platform: Single Axon Injury and Regeneration,” Lab on a Chip, Vol. 11, No. 22, pp. 3888-3895, 2011.
  146. J. Kimberley & K.T. Ramesh, “The Rate Dependence of the Strength of an Ordinary Chondrite,” Meteoritics and Planetary Science, Vol. 46, No. 11, pp. 1653-1669, 2011.
  147. Guangli Hu, K.T. Ramesh, Buyang Cao, J.W. McCauley. “The Compressive Failure of Aluminum Nitride Considered as a Model Advanced Ceramic,” Journal of the Mechanics and Physics of Solids, Vol. 59, pp. 1076-1093, 2011.
  148. N.P. Daphalapurkar, K.T. Ramesh, L. Graham-Brady, J.-F. Molinari, "Predicting Variability in the Dynamic Failure Strength of Brittle Materials Considering Pre-existing Flaws," Journal of the Mechanics and Physics of Solids, Vol. 59, No. 2, pp. 297-319, 2011.
  149. Misra, S., K.T. Ramesh, & Okamura, A., “Modeling of non-linear elastic tissues for surgical simulation,” Computer Methods in Biomechanics and Biomedical Engineering, Vol. 13, No. 6, pp. 811–818, 2010.
  150. Misra, S., Reed, K.B., Schafer, B.W., Okamura, A. & K.T. Ramesh, “Mechanics of Flexible Needles Robotically Steered through Soft Tissue,” International Journal of Robotics Research, 29 (13), pp. 1640-1660, 2010.
  151. Kimberley, J., Ramesh, K.T., Barnouin, O.S., Swaminathan, P.K. and C.M. Ernst, “The Dynamic Fracture of Rocky Bodies: Applications to Planetary Impact Problems,” Johns Hopkins APL Technical Digest, 28 (3), pp. 242-243, 2010.
  152. Kimberley, J., K. T. Ramesh, and O. Barnouin-Jha, “Visualization of the failure of quartz under quasistatic and dynamic compression,” Journal of Geophysical Research-Solid Earth, Vol. 115, Article No. B08207, 2010.
  153. Huskins, E.L., B. Cao, K.T. Ramesh, “Strengthening mechanisms in an Al–Mg alloy,” Materials Science & Engineering A, Vol. 527, Issue 6, pp. 1292-1298, 2010.
  154. Vogt, R., Z. Zhang, E.L. Huskins; B. Ahn, S. Nutt, K.T. Ramesh, E.J. Lavernia, and J.M. Schoenung, “High Strain Rate Deformation and Resultant Damage Mechanisms in Ultrafine-grained Aluminum Matrix Composites,” Materials Science & Engineering A, Vol. 527, Issues 21-22, pp. 5990-5996, 2010.
  155. Byer, C.M., B. Li, B. Cao, K.T. Ramesh, “Microcompression of single-crystal magnesium,” Scripta Materialia, Volume 62, Issue 8, pp. 536-539, 2010.
  156. Li, B., S. Joshi, K. Azevedo, E. Ma, K. T. Ramesh, R.B. Figueiredo, and T.G. Langdon, “Dynamic Testing at High Strain Rates of an Ultrafine-Grained Magnesium Alloy Processed by ECAP,” Materials Science and Engineering A, Vol. 517, Issue: 1-2, pp. 24-20, 2009.
  157. Espinosa, H.D., K.T. Ramesh, G. Ravichandran, “Rodney James Clifton,” Experimental Mechanics, Vol. 49, Issue: 2, Special Issue, pp. 165-168, 2009.
  158. Sung, Y.S., Joshi, S.P., & K.T. Ramesh, “An Enhanced Continuum Model for Size-Dependent Strengthening and Failure of Particle Reinforced Composites,” Acta Materialia, Vol. 57, pp. 5848–5861, 2009.
  159. B. Li, Cao, B., K.T. Ramesh, E. Ma, “A nucleation mechanism of deformation twins in pure aluminum.” Acta Materialia, Vol. 57, pp. 4500-4507, 2009.
  160. Wright, T.W. & Ramesh, K.T., “Statistically informed dynamics of void growth in rate dependent materials,” International Journal of Impact Engineering, Vol. 36, pp. 1242-1249, 2009.
  161. S.P. Joshi, C. Eberl, B. Cao, K.T. Ramesh & K.J. Hemker, “On the Occurrence of Portevin – Le Châtelier Instabilities in Ultrafine-Grained 5083 Aluminum Alloys,” Experimental Mechanics, Vol. 49, No. 2, pp. 207-218, 2009.
  162. S. Misra, K.J. Macura, K.T. Ramesh, and A.M. Okamura, "The Importance of Organ Geometry and Boundary Constraints for Planning of Medical Interventions,” Medical Engineering Physics, Vol. 31, No. 2, pp. 195-206, 2009.
  163. Languerand, D.L., H. Zhang, N.S. Murthy, & K.T. Ramesh, “Inelastic Behavior and Fracture of High Modulus Polymeric Fiber Bundles at High Strain Rates,” Materials Science & Engineering A, Vol. 500, No. 1-2, pp. 216-224, 2009.
  164. J.W. McCauley, P. Patel, M.W. Chen, G. Gilde, E. Strassburger, B. Paliwal, K.T. Ramesh and D.P. Dandekar, “AlON: A Brief History of its Emergence and Evolution,” Journal of European Ceramic Society, Vol. 29, pp. 223–236, 2009.
  165. Paliwal, B., K.T. Ramesh & J.W. McCauley, “Dynamic compressive failure of AlON under controlled planar confinement,” Journal of the American Ceramic Society, Vol. 91, No. 11, pp. 3619-3629, 2008.
  166. Meulbroek, J.P., K.T. Ramesh, P.K. Swaminathan, and A. M. Lennon, “CTH simulations of an expanding ring to study fragmentation,” International Journal of Impact Engineering, Vol. 35, No. 12, pp. 1661-1665, 2008.
  167. Li, B., Ma, E., K.T. Ramesh, “Dislocation configurations in an extruded ZK60 magnesium alloy,” Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, Vol. 39A, No. 11, pp. 2607-2614, Nov. 2008.
  168. Zhang, H., K.T. Ramesh, Chin, E.S.C., “A multi-axial constitutive model for metal matrix composites,” Journal of Mechanics and Physics of Solids, Vol. 56, No. 10, pp. 2972-2983, Oct. 2008.
  169. Zhang, H., J. Ye, S.P. Joshi, J.M. Schoenung, E.S.C. Chin, and K.T. Ramesh, “Rate-Dependent Behavior of Hierarchical Al Matrix Composites,” Scripta Materialia, Vol. 59, No. 10, pp.1139-1142, Nov. 2008.
  170. Schuster, B.E., Q. Wei, T.C. Hufnagel & K.T. Ramesh, “Size-Independent Strength and Deformation Mode in Compression of a Pd-based Metallic Glass,” Acta Mater., Vol. 56, pp. 5091-5100, 2008.
  171. Wei, Q., K. T. Ramesh, L.J. Kecskes, S. N. Mathaudhu, and K. T. Hartwig, “Ultrafine and nanostructured refractory metals processed by SPD: microstructure and mechanical properties,” Materials Science Forum, Vol. 579, pp. 75-90, 2008.
  172. Wei, Q., B. E. Schuster, K. T. Hartwig, L. J. Kecskes, R. J. Dowding and K. T. Ramesh, “Dynamic behavior of body-centered cubic metals with ultra-fine-grain and nanocrystalline microstructures,” Materials Science & Engineering A, Vol. 493, No. 1-2, pp. 58-64, 2008.
  173. S. P. Joshi & K.T. Ramesh, “Grain Size Dependent Shear Instabilities in BCC and FCC Materials,” Materials Science & Engineering A, Vol. 493, No. 1-2, pp. 65-70, 2008.
  174. S.P. Joshi & K.T. Ramesh, “Stability Map for Nanocrystalline and Amorphous Materials,” Physical Review Letters, Vol. 101, No. 2, Art. No. 025501, Jul. 2008.
  175. S. Misra, A. Okamura and K.T. Ramesh, “Modeling of Tool-Tissue Interactions for Computer-Based Surgical Simulation: A Literature Review,” Presence, 17(5): pp. 463-491, Oct. 2008.
  176. R. Kraft, J. F. Molinari and K. T. Ramesh, “Computational Micromechanics of Dynamic Compressive Loading of Brittle Polycrystalline Material Using a Distribution of Grain Boundary Properties,” Journal of Mechanics and Physics of Solids, Vol. 56, No. 8, pp. 2618-2641, Aug. 2008.
  177. T.W. Wright & K.T. Ramesh, “Dynamic Void Nucleation and Growth in Solids: A Self-Consistent Statistical Theory,” Journal of the Mechanics and Physics of Solids, 56, pp. 336–359, 2008.
  178. J.R. Greer, H. Espinosa, E. Nadgorny & K.T. Ramesh, “Comment on "Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal”,” Applied Physics Letters, 92, No. 096101, 2008.
  179. B. Paliwal & K.T. Ramesh, “An interacting micro-crack damage model for failure of brittle materials under compression,” Journal of the Mechanics and Physics of Solids, 56, pp. 896–923, Mar. 2008.
  180. S.P. Joshi and K.T. Ramesh, “Rotational Diffusion and Grain-Size Dependent Shear Instability in Nanostructured Materials,” Acta materialia, Vol. 56, pp. 282–291, Jan. 2008.
  181. B.E. Schuster, Q. Wei, M.H. Ervin, S. Hruszkewycz, M.K. Miller, T.C. Hufnagel & K.T. Ramesh, “Bulk and Micro-Scale Compressive Properties of a Pd-based Metallic Glass,” Scripta materialia, Volume 57, No. 6, pp. 517-520, 2007.
  182. S. P. Joshi & K.T. Ramesh, “An enriched continuum model for the design of a hierarchical composite,” Scripta materialia, Volume 57, No. 9, pp. 877-880, 2007.
  183. B. Paliwal & K.T. Ramesh, “Effect of crack growth dynamics on the rate sensitive behavior of hot-pressed boron carbide,” Scripta materialia, Vol. 57, pp. 481–484, 2007.
  184. H. Saraf, K.T. Ramesh, A.M. Lennon, A.C. Merkle & J.C. Roberts, “Measurement of the Dynamic Bulk and Shear Response of Soft Human Tissues,” Experimental Mechanics, Vol. 47, pp. 439-449, 2007.
  185. H. Saraf, K.T. Ramesh, A.M. Lennon, A.C. Merkle & J.C. Roberts, “Mechanical Properties of Soft Human Tissues under Dynamic Loading,” Journal of Biomechanics, Vol. 40, pp. 1960–1967, 2007.
  186. H. Zhang, S.P. Joshi, K.T. Ramesh, J. Ye, J.M. Schoenung, E.S.C. Chin & G. A. Gazonas, “Superlightweight Nanoengineered Aluminum for Strength under Impact,” Advanced Engineering Materials, Volume 9, No. 5, pp. 355-359, 2007.
  187. Li, Y., Ramesh, K.T., & Chin, E.S.C., “Plastic Deformation and Failure in A359 Aluminum and an A359/SiCp MMC under Quasistatic and High-Strain-Rate Tension,” Journal of Composite Materials, Vol. 41, No. 1, pp. 27-41, 2007.
  188. Li, Y. & Ramesh, K.T., “An Optical Technique for Accurate Measurement of Material Properties in the Tension Kolsky Bar,” International Journal of Impact Engineering, Volume 34, No. 4, pp. 784-798, 2007.
  189. Zhou, F., Molinari, J.F. & Ramesh, K.T., “An Elasto-Visco-Plastic Analysis of Ductile Expanding Rings,” International Journal of Impact Engineering, Volume 33, Issues 1-12, Pages 880-891, 2006.
  190. R.T. Ott, F. Sansoz, T. Jiao, D. Warner, C. Fan, J.-F. Molinari, K.T. Ramesh and T.C. Hufnagel, “Yield criteria and strain-rate behavior of Zr57.4Cu16.4Ni8.2Ta8Al10 metallic-glass-matrix composites” Metallurgical & Materials Transactions, Vol. 37A, No. 11: 3251-3258, 2006.
  191. Q. Wei, T. Jiao, K.T. Ramesh, E. Ma, L.J. Kecskes, L. Magness, R. Dowding, V.U. Kazykhanov & R.Z. Valiev, “Microstructure and mechanical properties of super-strong nanocrystalline tungsten processed by high-pressure torsion,” Acta Materialia, 54, No. 15, pp. 4079-4089, 2006.
  192. Volokh, K. Y. and Ramesh, K.T., “An approach to multi-body interactions in a continuum-atomistic context: application to analysis of tension instability in carbon nanotubes,” International Journal of Solids and Structures, Vol. 43, Nos. 25-26, pp. 7609-7627, 2006.
  193. H. Zhang, M.W. Chen, K.T. Ramesh, J. Ye, J. Schoenung, E.S.C. Chin, “Tensile Behavior and Dynamic Failure of Aluminum 6092/B4C Composites,” Materials Science & Engineering A, Vol. 433, pp. 70-82, 2006.
  194. Q. Wei, K.T. Ramesh, B.E. Schuster, L.J. Kecskes & R.J. Dowding, “Nanoengineering Opens a New Era for Tungsten as Well,” Journal of Metals, pp. 40-44, September 2006.
  195. Joshi, S.P., Ramesh, K.T., Han, B.Q., and Lavernia, E.J. “Modeling the Constitutive Response of Bimodal Metals,” Metallurgical & Materials Transactions, Vol. 37A, pp. 2397-2404, 2006.
  196. Zhou, F., Ramesh, K.T. & Molinari, J.F., “Characteristic Fragment Size Distribution of Dynamically Expanding Rings,” Applied Physics Letters, Vol. 88, No. 26: Art. No. 261918, 2006.
  197. Paliwal, B., Ramesh, K.T. & McCauley, J.W., “Direct observation of the dynamic compressive failure of a transparent polycrystalline ceramic (AlON),” Journal of the American Ceramic Society, Vol. 89, No. 7, pp. 2128-2133, 2006.
  198. Zhou, F., J.F. Molinari & K.T. Ramesh, “Effects of Material Properties and Strain Rate on the Fragmentation of Brittle Materials,” International Journal of Fracture, Vol. 139, pp. 169-196, 2006.
  199. Zhou, F., Jean-Francois Molinari & K.T. Ramesh, "Analysis of the brittle fragmentation of an expanding ring", Computational Material Sciences, Vol. 37, pp. 74-85, 2006.
  200. Zhou, F., T.W. Wright & K.T. Ramesh, "The formation of multiple adiabatic shear bands", Journal of Mechanics and Physics of Solids, Vol. 54, pp. 1376-1400, 2006.
  201. Schuster, B.E., Wei, W., Zhang, H. and Ramesh, K.T., “Microcompression of Nanocrystalline Nickel,” Applied Physics Letters, 88, No. 103112, 2006.
  202. Zhou, F., T.W. Wright & K.T. Ramesh, "A numerical methodology for investigating the formation of adiabatic shear bands", Journal of Mechanics and Physics of Solids, Vol. 54, 904-926, 2006.
  203. Q. Wei, T. Jiao, K.T. Ramesh, E. Ma, L.J. Kecskes, L. Magness, R. Dowding, V.U. Kazykhanov & R.Z. Valiev, “Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression,” Acta Materialia, Vol. 54, No. 1, pp. 77-87, 2006.
  204. Zhang, H., Schuster, B.E., Wei, Q. & K.T. Ramesh, “The design of accurate microcompression experiments,” Scripta Materialia, Vol. 54, pp. 181-186, 2006.
  205. Zhang, H., K.T. Ramesh and E.S.C. Chin, “Effects of Interfacial Debonding on the Rate-Dependent Response of Metal Matrix Composites,” Acta Materialia, Vol. 53, pp. 4687-4700, 2005.
  206. Zhou, F., J.F. Molinari & K.T. Ramesh, “A Cohesive-Model Based Fragmentation Analysis: Effects of Strain Rate and Initial Defects Distribution,” International Journal of Solids and Structures, Vol. 42, pp. 5181-5207, 2005.
  207. Wei, Q., Ramesh, K.T., Ma, E., Kecskes, L.J., Dowding, R.J., Kazykhanov, V.U. and Valiev, R.Z., “Plastic Flow Localization in Bulk Tungsten with Ultrafine Microstructure,” Applied Physics Letters, Vol. 86, 101907, 2005.
  208. S.R. Bilyk, K.T. Ramesh & T.W. Wright, “Finite Deformations of Metal Cylinders Subjected to Electromagnetic Fields and Mechanical Forces,” Journal of Mechanics and Physics of Solids, Vol. 53, pp. 525-544, 2005.
  209. R. T. Ott, F. Sansoz, J. F. Molinari, J. Almer, K. T. Ramesh, and T. C. Hufnagel, “Micromechanics of deformation of metallic-glass-matrix composites from in situ synchrotron strain measurements and finite element modeling,” Acta materialia, Vol. 53, pp. 1883-1893, 2005.
  210. Jiao, T., L.J. Kecskes, T.C. Hufnagel & K.T. Ramesh, “Deformation and Failure of Zr57Nb5Al10Cu15.4Ni12.6/W Particle Composites under Quasistatic and Dynamic Compression,” Metallurgical and Materials Transactions, Vol. 35, No. 11, pp. 3439-3444, 2004.
  211. Jia, D. & Ramesh, K.T., “A Rigorous Assessment of the Benefits of Miniaturization in the Kolsky Bar System,” Experimental Mechanics, Vol. 44, No. 5, pp. 445-454, 2004.
  212. Zhang, H., K.T. Ramesh and E.S.C. Chin, “High Strain Rate Response of Aluminum 6092/B4C Composites,” Materials Science & Engineering A, Vol. 384, Nos. 1-2, pp. 26-34, 2004.
  213. Y. Li, K.T. Ramesh, & E.S.C. Chin, “The Mechanical Response of an A359/SiCp MMC and the A359 Aluminum Matrix to Dynamic Shearing Deformations,” Materials Science & Engineering A, Vol. 382, pp. 162-170, 2004.
  214. Jiao, T., Li, Y., Ramesh, K.T. & Wereszczak, A, “High Rate Response and Dynamic Failure of Structural Ceramics,” International Journal of Applied Ceramic Technology, Vol. 1, No. 3, pp. 243-253, 2004.
  215. Q. Wei, L. Kecskes, T. Jiao, K. T. Hartwig, K. T. Ramesh and E. Ma, “Adiabatic shear banding in ultrafine-grained Fe processed by severe plastic deformation,” Acta Materialia, Vol. 52, No. 7, pp. 1859-1869, 2004.
  216. Q. Wei, Y.M. Wang, K. T. Ramesh and E. Ma, “Effects of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity: fcc versus bcc metals,” Materials Science & Engineering A, Vol. 381, Nos. 1-2, pp 71-79, 2004.
  217. Wang, H. and Ramesh, K.T., “Dynamic Strength and Fragmentation of Hot-Pressed Silicon Carbide under Uniaxial Compression,” Acta Materialia, Vol. 52, No. 2, pp. 355-367, 2004.
  218. Glynn, M.L., Chen, M.W., Ramesh, K.T. & Hemker, K.J., “The influence of a martensitic phase transformation on stress development in thermal barrier coating systems,” Metallurgical and Materials Transactions A, Vol. 35, No. 8, pp. 2281-2288, 2004.
  219. Chichili, D.R., Ramesh, K.T. & Hemker, K.J., “Adiabatic Shear Localization in Alpha-Titanium: Experiments, Modeling and Microstructural Evolution,” Journal of Mechanics and Physics of Solids, Vol. 52, pp. 1889-1909, 2004.
  220. Li, Y., Ramesh, K.T., & Chin, E.S.C., “Comparison of the Plastic Deformation and Failure of A359/SiC and 6061-T6/Al2O3 Metal Matrix Composites under Dynamic Tension,” Materials Science and Engineering A, Vol. 371, Issues 1-2, pp. 359-370, 2004.
  221. Lennon, A.M. & Ramesh, K.T., “The Influence of Crystal Structure on the Dynamic Behavior of Materials at High Temperatures,” International Journal of Plasticity, Vol. 20, pp. 269-290, 2004.
  222. Wei, Q., Jiao, T., Ramesh, K.T. & Ma, E., “Processing and mechanical properties of nanostructured vanadium under quasi-static and dynamic compression,” Scripta Materialia, Vol. 50, No. 3, pp. 359-364, 2004.
  223. Wu, X.Y., Ramesh, K.T. and Wright, T.W., “The coupled effects of plastic strain gradient and thermal softening on the dynamic growth of voids,” International Journal of Solids and Structures, Vol. 40, No. 24, pp. 6633-6651, 2003.
  224. Q. Wei, T. Jiao, S.N. Mathaudhu, E. Ma, K.T. Hartwig and K. T. Ramesh, “Microstructure and Mechanical Properties of Tantalum after Equal Channel Angular Extrusion (ECAE),” Materials Science and Engineering A, Vol. 358, pp. 266-272, 2003.
  225. Gu X, Jiao T, Kecskes LJ, Woodman RH, Fan C, Ramesh KT, Hufnagel TC, “Crystallization and mechanical behavior of (Hf, Zr)-Ti-Cu-Ni-Al metallic glasses,” Journal of Non-Crystalline Solids, Vol. 317, Nos. 1-2, pp. 112-117, 2003.
  226. Jia, D., Ramesh, K.T. and Ma, E., “Effects of Nanocrystalline and Ultrafine Grain Sizes on Constitutive Behavior and Shear Bands in Iron,” Acta Mater., Vol. 51, No. 12, pp. 3495-3509, 2003.
  227. Wu, X.Y., Ramesh, K.T. and Wright, T.W., “The Effects of Thermal Softening and Heat Conduction on the Dynamic Growth of Voids,” International Journal of Solids and Structures, Vol. 40, No. 17, pp. 4461-4478, 2003.
  228. Marra, S.P., Ramesh, K.T. & Douglas, A.S., “Characterization and Modeling of Compliant Active Materials,” Journal of the Mechanics and Physics of Solids, Volume 51, Issue 9, pp. 1723-1743, 2003.
  229. Wu, X.Y., Ramesh, K.T. & Wright, T.W., “The Dynamic Growth of a Single Void in a Viscoplastic Material under Transient Hydrostatic Loading,” Journal of the Mechanics and Physics of Solids, Vol. 51, No. 1, pp. 1-26, 2003.
  230. Li, Y., Ramesh, K.T., & Chin, E.S.C., “Determination of the Dynamic Fracture Initiation Toughness of Metal-Ceramic Composites,” Key Engineering Materials, Vol. 243-244, pp. 57-62, 2002.
  231. Li, Y. & Ramesh, K.T., “Numerical Analysis of the Direct Tension Kolsky Bar,” Key Engineering Materials, Vol. 243-244, pp. 153-158, 2002.
  232. Wei, Q., Jia, D., Ramesh, K.T. and Ma, E., “Evolution and Microstructure of Shear Bands in Nanostructured Fe,” Applied Physics Letters, Vol. 81, No. 7, pp. 1240-1242, 2002.
  233. Ramesh, K.T., “Effects of High Rates of Loading on the Deformation Behavior and Failure Mechanisms of HCP Metals and Alloys,” Metallurgical and Materials Transactions, Vol. 33A, pp. 927-935, 2002.
  234. Marra, S.P., Ramesh, K.T. & Douglas, A.S., “The actuation of a biomimetic poly(vinyl alcohol)-poly(acrylic acid) gel,” Philosophical Transactions of the Royal Society of London A, Vol. 360, pp. 175-198, 2002.
  235. Hufnagel, T.C., Xing, L.-Q., Li, Y., Jia, D., & Ramesh, K.T., “Deformation and Failure of Bulk Amorphous Zr57Ti5Cu20Ni8Al10 under quasi-static and dynamic compression,” Journal of Materials Research, Vol. 17, Issue 6, pp. 1441-1445, 2002.
  236. Liu, Y., Li. Y, Xie, Z., & Ramesh, K.T., “Dynamic deformation of shape-memory alloys: evidence of domino detwinning?” Philosophical Magazine Letters, Vol. 82, No. 9, pp. 511-517, 2002.
  237. Liu, Y., Li, Y., & Ramesh, K.T., “Rate Dependence of Deformation Mechanisms in a Shape Memory Alloy,” Philosophical Magazine A, Vol. 28, No. 12, pp. 2461-2473, 2002.
  238. Jia, D., Wang, Y.M., Ramesh, K.T., Ma, E., Zhu, Y.T. & Valiev, R.Z., “Deformation behavior of ultra-fine-grained titanium,” Applied Physics Letters, Vol. 79, No. 5, pp. 611-613, 2001.
  239. Xing, L.-Q., Li, Y., Ramesh, K.T., Li, J. & Hufnagel, T.C., “Enhanced plastic strain in Zr-based bulk amorphous alloys,” Physical Review B, Vol. 64 (18): Article No. 180201, 2001.
  240. Marra, S.P., Ramesh, K.T. & Douglas, A.S., “Mechanical characterization of active poly(vinyl alcohol)-poly(acrylic acid) gel,” Materials Science & Engineering C, Vol. 14, pp. 25-34, 2001.
  241. Jia, D., Ramesh, K.T., Ma, E., Lu, L. & Lu, K., “Compressive Behavior of an Electrodeposited Nanostructured Copper at Quasistatic and High Strain Rates,” Scripta Materialia, Vol. 45, pp. 613-620, 2001.
  242. Li, Y., Ramesh, K.T. & E.S.C. Chin, “Dynamic Characterization of Layered and Graded Structures under Impulsive Loading,” International Journal of Solids and Structures, Vol. 38 (34-35), pp. 6045-6061, 2001.
  243. Jia, D., Ramesh, K.T. & Ma, E., “Failure Mode and Dynamic Behavior of Nanophase Iron under Compression,” Scripta Materialia, Vol. 42, pp. 73-78, 2000.
  244. Li, Y., Ramesh, K.T. & Chin, E.S.C., “Viscoplastic Deformations and Compressive Damage in an A359/SiCp Metal-Matrix Composite,” Acta Materialia, Vol. 48, pp. 1563-1573, 2000.
  245. Li, Y., Ramesh, K.T. & Chin, E.S.C., “The Compressive Viscoplastic Response of an A359/SiCp Metal-Matrix Composite and of the A359 Aluminum Alloy Matrix,” International Journal of Solids and Structures, Vol. 37, No. 51, pp. 7547-7562, 2000.
  246. Lennon, A.M., & Ramesh, K.T., “The Thermoviscoplastic Response of Polycrystalline Tungsten in Compression,” Materials Science & Engineering A, Vol. 276, pp. 9-21, 2000.
  247. Jia, D. Lennon, A.M., & Ramesh, K.T., “High-Strain-Rate Pressure-Shear Recovery: A New Experimental Technique,” International Journal of Solids & Structures, Vol. 37, No. 12, pp. 1679-1699, 2000.
  248. Liu, Y., Li, Y., Ramesh, K.T., & van Humbeeck, J., “High Strain Rate Deformation of Martensitic NiTi Shape Memory Alloy,” Scripta Materialia, Vol. 41, No. 1, pp. 89-95, 1999.
  249. Marra, S.P., Ramesh, K.T. & Douglas, A.S., “The Mechanical and Electromechanical Properties of Calcium-modified Lead Titanate/Poly(vinylidene fluoride-trifluoroethylene) 0-3 Composites,” Smart Materials and Structures, Vol. 8, pp. 57-63, 1999.
  250. Marra, S.P., Ramesh, K.T. & Douglas, A.S., “The Mechanical Properties of lead-titanate/polymer 0-3 Composites,” Composites Science & Technology, Vol. 59, pp. 2163-2173, 1999.
  251. Chichili, D.R. & Ramesh, K.T., “Recovery Experiments for Adiabatic Shear Localization: A Novel Experimental Technique,” Journal of Applied Mechanics, Vol. 66, pp. 10-20, 1999.
  252. Lennon, A.M., & Ramesh, K.T., “A Technique for Measuring the Dynamic Behavior of Materials at High Temperatures,” International Journal of Plasticity, Vol. 14, No. 12, pp. 1279-1292, 1998.
  253. Li, Y., & Ramesh, K.T., “Influence of Particle Volume Fraction, Shape and Aspect Ratio on the Behavior of Particle-Reinforced Metal-Matrix Composites at High Rates of Strain,” Acta Materialia, Vol. 46, No. 16, pp. 5633-5646, 1998.
  254. Zhang, Y. & Ramesh, K.T., “On the Compressibility of a Glass-Forming Lubricant: Experiments and Molecular Modeling,” Journal of the Mechanics and Physics of Solids, Vol. 46, No. 10, pp. 1699-1722, 1998.
  255. Yadav, S. & Ramesh, K.T., “The Mechanical Behavior of Polycrystalline Hafnium: Strain Rate and Temperature Dependence,” Materials Science & Engineering A, Vol. 246, pp. 265-281, 1998.
  256. Chichili, D.R., Ramesh, K.T. & Hemker, K.J., “The High-Strain-Rate Response of Alpha-Titanium: Experiments, Deformation Mechanisms, and Modeling,” Acta Materialia, Vol. 46, No. 3, pp. 1025-1043, 1998.
  257. da Silva, M. & Ramesh, K.T., “The Rate-Dependent Deformation and Localization of Fully Dense and Porous Ti-6Al-4V,” Materials Science & Engineering A, Vol. 232, pp. 11-22, 1997.
  258. da Silva, M. & Ramesh, K.T., “The Rate-Dependent Deformations of Porous Pure Iron,” International Journal of Plasticity, Vol. 13, pp. 587-610, 1997.
  259. Feng, R., Ramesh, K.T., & Douglas, A.S. “An Analytical and Computational Investigation of High-Rate Rheometry,” Journal of Tribology, Vol. 118, No. 3, pp. 601-607, 1996.
  260. Ramesh, K.T., & Narasimhan, S., “Finite Deformations and the Dynamic Measurement of Radial Strains in Compression Kolsky Bar Experiments,” International Journal of Solids & Structures, Vol. 33, No. 25, pp. 3723-3738, 1996.
  261. Y. Zhang & Ramesh, K.T., “The Behavior of an Elastohydrodynamic Lubricant at Moderate Pressures and High Shear Rates,” Journal of Tribology, Vol. 118, pp. 162-168, 1996.
  262. S. Yadav & Ramesh, K.T., “The Mechanical Properties of Tungsten-Based Composites at Very High Strain Rates,” Materials Science & Engineering A, Vol. 203, pp. 140-153, 1995.
  263. Ramesh, K.T., & Kelkar, N., “Technique for the Continuous Measurement of Projectile Velocities in Plate Impact Experiments,” Review of Scientific Instruments, Vol. 66, No. 4, pp. 3034-3036, 1995.
  264. Yadav, S., Chichili, D.R., & Ramesh, K.T., “The Mechanical Response of a 6061-T6 Al/Al2O3 Metal-Matrix Composite at High Rates of Deformation,” Acta Metallurgica, Vol. 43, pp. 4453-4464, 1995.
  265. Chichili, D.R., & Ramesh, K.T., “Dynamic Failure Mechanisms in a 6061-T6 Al/Al2O3 Metal-Matrix Composite,” International Journal of Solids and Structures, Vol. 32, No. 17/18, pp. 2609-2626, 1995.
  266. Ramesh, K.T., “On the Localization of Shearing Deformations in Tungsten Heavy Alloys,” Mechanics of Materials, Vol. 17, pp. 165-173, 1994.
  267. Feng, R., & Ramesh, K.T., “On the Compressibility of Elastohydrodynamic Lubricants,” Journal of Tribology, Vol. 115, pp. 557-559, 1993.
  268. Bao, G., & Ramesh, K.T., “Plastic Flow of a Tungsten-Based Composite under Quasi-Static Compression,” Acta Metallurgica et Materialia, Vol. 41, No. 9, pp. 2711-2719, 1993.
  269. Feng, R., & Ramesh, K.T., “The Rheology of Lubricants at High Shear Rates,” Journal of Tribology, Transactions of the ASME, Vol. 115, pp. 640 -649, 1993.
  270. Ramesh, K.T., & Coates, R.S., “Microstructural Influences on the Dynamic Response of Tungsten Heavy Alloys,” Metallurgical Transactions A, Vol. 23A, pp. 2625-2630, 1992.
  271. Coates, R.S. & Ramesh, K.T., “The Rate - Dependent Deformation of a Tungsten Heavy Alloy,” Materials Science and Engineering A, Vol. 145, pp. 159-166, 1991.